Editor
Save
Note Author
Select your name...
Anna O.
Banan G.
Caden R.
Carson W.
Charlie H.
Daniel M.
David S.
Dina H.
DJ J.
Edan E.
Edward K.
Elan P.
Ella G.
Erika F.
Ethan C.
Firmiana W.
Foziea G.
Gabe C.
Jake A.
James B.
Jeana T.
Jonathan L.
Kevin L.
Laura M.
Lawrence Z.
Leilani C.
Lukas G.
Malia F.
Mark H.
Marlow T.
Maya E.
Mayank H.
Nhan T.
Noah B.
Nolan D.
Reese P.
Sam K.
Sarah H.
Shashank H.
Skye P.
Stefania D.
Tanish K.
Tommy C.
Adam P.
Billy D.
Bob S.
Chris E.
Dan M.
Greg S.
Hyunjoon K.
Ian R.
Lobna B.
Michal O.
Mike K.
Nathan P.
Nikolai M.
Rishi T.
Robin P.
Stacy S.
Sue K.
Zade L.
Location
Date
Duration
0.5 hours
1 hour
1.5 hours
2 hours
2.5 hours
3 hours
3.5 hours
4 hours
4.5 hours
5 hours
5.5 hours
6 hours
6.5 hours
7 hours
7.5 hours
8 hours
8.5 hours
9 hours
9.5 hours
10 hours
Group
Select a group...
Electrical & Code 2020
Climber 2020
Shooter 2020
Intake 2020
Wheel 2020
CAD & Integration 2020
Assembly 2020
Don't see your name under
Attendance
? Manage your group
here
and then reselect your group above!
Attendance
- Click to toggle
Members Present
- Click to remove
Students
Anna O.
Caden R.
Carson W.
Charlie H.
Daniel M.
David S.
Dina H.
Edan E.
Edward K.
Elan P.
Ella G.
Erika F.
Firmiana W.
Gabe C.
Jake A.
James B.
Jeana T.
Jonathan L.
Kevin L.
Laura M.
Lawrence Z.
Leilani C.
Lukas G.
Malia F.
Mark H.
Marlow T.
Mayank H.
Nhan T.
Noah B.
Nolan D.
Reese P.
Sam K.
Sarah H.
Shashank H.
Skye P.
Stefania D.
Tanish K.
Tommy C.
Mentors
Adam P.
Billy D.
Bob S.
Chris E.
Dan M.
Ian R.
Michal O.
Mike K.
Zade L.
Students
Mentors
Guests
- Optional
& Malia
& Nolan
& Caden
Students
Foziea G.
Tommy C.
Tanish K.
Stefania D.
Skye P.
Shashank H.
Sam K.
Nolan D.
Noah B.
Nhan T.
Mayank H.
Mark H.
Malia F.
Lukas G.
Leilani C.
Lawrence Z.
Kevin L.
Jonathan L.
Jeana T.
James B.
Gabe C.
Firmiana W.
Erika F.
Elan P.
Edward K.
Edan E.
Dina H.
David S.
Daniel M.
Charlie H.
Carson W.
Caden R.
Anna O.
Ella G.
Jake A.
Sarah H.
Reese P.
Laura M.
Marlow T.
Mentors
Nikolai M.
Mike K.
Michal O.
Ian R.
Dan M.
Chris E.
Bob S.
Billy D.
Adam P.
Zade L.
Students
Mentors
Guests
- Optional
& Malia
& Nolan
& Caden
Students
Anna O.
Caden R.
Carson W.
Charlie H.
Daniel M.
David S.
Dina H.
Edan E.
Edward K.
Elan P.
Ella G.
Erika F.
Firmiana W.
Gabe C.
Jake A.
James B.
Jeana T.
Jonathan L.
Kevin L.
Laura M.
Lawrence Z.
Leilani C.
Lukas G.
Malia F.
Mark H.
Marlow T.
Mayank H.
Nhan T.
Nolan D.
Noah B.
Reese P.
Sam K.
Sarah H.
Shashank H.
Skye P.
Stefania D.
Tanish K.
Tommy C.
Mentors
Adam P.
Billy D.
Bob S.
Chris E.
Dan M.
Michal O.
Mike K.
Zade L.
Students
Mentors
Guests
- Optional
& Malia
& Nolan
& Caden
Students
Anna O.
Gabe C.
Jake A.
James B.
Jeana T.
Jonathan L.
Kevin L.
Laura M.
Lawrence Z.
Leilani C.
Lukas G.
Firmiana W.
Erika F.
Caden R.
Carson W.
Charlie H.
Daniel M.
David S.
Dina H.
Edan E.
Edward K.
Elan P.
Ella G.
Malia F.
Mark H.
Tommy C.
Tanish K.
Stefania D.
Skye P.
Marlow T.
Mayank H.
Nhan T.
Noah B.
Nolan D.
Reese P.
Sam K.
Sarah H.
Shashank H.
Mentors
Adam P.
Billy D.
Bob S.
Chris E.
Dan M.
Michal O.
Mike K.
Zade L.
Students
Mentors
Guests
- Optional
& Malia
& Nolan
& Caden
Students
Stefania D.
Dina H.
Anna O.
Caden R.
Carson W.
Charlie H.
Daniel M.
David S.
Edan E.
Edward K.
Elan P.
Ella G.
Erika F.
Firmiana W.
Gabe C.
Jake A.
James B.
Jeana T.
Jonathan L.
Kevin L.
Laura M.
Lawrence Z.
Leilani C.
Lukas G.
Malia F.
Mark H.
Marlow T.
Mayank H.
Nhan T.
Noah B.
Nolan D.
Reese P.
Sam K.
Sarah H.
Shashank H.
Skye P.
Tanish K.
Tommy C.
Mentors
Adam P.
Billy D.
Bob S.
Chris E.
Dan M.
Ian R.
Michal O.
Mike K.
Zade L.
Students
Mentors
Guests
- Optional
& Malia
& Nolan
& Caden
Students
James B.
Dina H.
Jonathan L.
Mentors
Chris E.
Students
Mentors
Guests
- Optional
& Malia
& Nolan
& Caden
Students
Anna O.
Skye P.
Tanish K.
Stefania D.
Maya E.
Marlow T.
Mark H.
Malia F.
Lukas G.
Lawrence Z.
Laura M.
Shashank H.
Sarah H.
Banan G.
Caden R.
Carson W.
Charlie H.
Mayank H.
Nhan T.
Noah B.
Nolan D.
Reese P.
Sam K.
Kevin L.
Firmiana W.
Foziea G.
Elan P.
Ella G.
Erika F.
Edward K.
Edan E.
Gabe C.
Jake A.
James B.
Jeana T.
Jonathan L.
Ethan C.
Daniel M.
David S.
Dina H.
DJ J.
Mentors
Adam P.
Billy D.
Bob S.
Chris E.
Michal O.
Mike K.
Sue K.
Zade L.
Students
Mentors
Guests
- Optional
& Malia
& Nolan
& Caden
Work Completed
- Mandatory
Malia and Caden worked on the schematics training and got through half of it. They are going to finish it on next Monday (Jan 21st)
They will begin making a schematic of our electrical system!!!
Figured out that we need 2 more Gray Hill encoders and 1 more FRC Gyro & Accel for the two drivetrains
Can not find FRC Gyro & Accel for purchase that is not on the First Choice by Andymark...
Helped climber subteam test their prototype using Poly's shooter wheel motor controller
Tested it by changing the RPM value on Smart Dashboard
See #1 in work for next meeting to help them tomorrow
Adam tried another method of updating firmward on Quee Queg Jr. (RoboRIO). It also failed. He'll call NI Support again tomorrow.
Challenges
- Mandatory
At first, Malia and Caden struggled with the schematics, but now they understand the program more.
Testing the climber on poly had some difficulties since none of us knew much about Poly's code and control's system until Nolan came and helped
Work for Next Meeting
- Mandatory
Help Climber subteam finish testing their prototype
Finish the extension CAN cables on the Talon SRX that was originally from Poly's shooter wheel motor (requires soldering)
Figure out what value the encoder is giving us on the Smart Dashboard (probably talk to Adam about this)
Is it the value without taking into account the gear ratios?
Does it use the shooter's specific gear ratio?
Change the encoder numbers to consider the gear ratio of the climber gearbox so that we can get the climber to go at an exact RPM (or make a new PID loop and tune it to for the new gear ratio)
Put connectors on the new battery that is sitting on the shelves in a small white box --> get help on this!!!
Make list of all the general electrical components on the robot (FRC4096 --> 2018 - 2019 --> Build Season --> Electrical folder --> Electrical components)
Build a set-up to run a motor when testing and making prototypes
[ <-- hold off on this, we ordered a motor tester - Adam ]
Zach suggests using a three way switch (on forwards, off, on reverse)
One side, the motor is plugged in (two smaller anderson connectors)
A battery is plugged into the other side (large anderson connector on the battery)
Drivetrain Code
Continue working on robot.py, const.py, and oi.py
Begin commands/drivetrain.py & subsystems/drivetrain.py
Goal is to be done by early next week when the drivetrain is supposed to be done
Vision
Drive robot towards vision target so the target is in view of limelight; then have robot drive to a specified distance and turn to a specified angle from the vision target (using a calibrated position and the tx & ty from the limelight)
Get Rotate_To_Angle_Limelight command working on Atlaz. PID will need tuning.
Continue learning how to use limelight
Specifically learn what all of the different values on the network table are and how they can be used
Continue to look into the Limelight documentations
Go to specified range from target (check case studies on limelight website & documentation)
Go to specified range and aim at target (again check case studies)
Line Following
(Ordered set of 3 line trackers from Vex, wait for those to arrive before resuming this work. -Adam)
Mount the color sensor to Atlaz. Needs to be only a few centimeters away from floor, pointed at the carpet.
Determine what sensor object to use in code to get values from it. It's an I2C device.
Would be used to follow the white tape that is centered coming out from the spots where hatch panels are placed
Ultimate question is - Should line following be used instead of limelight vision in some places? Together with limelight vision? Or not at all this year?
Talk to other subteams and drivers to determine what semi-autonomous controls are desired --> need list of everything we wish to accomplish and order of priorities --> this has been started, but more work is definitely needed
Will need to finalize these after designs are finalized but should start to get an idea now
Then figure out what the best ways are to implement them
Encoders? Gyros? Limit Switches? Vision? Line Following? etc. etc.
On Schedule?
- Mandatory
Yes
Notes
- Mandatory
Cancel
Reset
Delete