Jayasurya - The victorious sun
Nah
Completed assembling both the grabbers with the new piston and new parts. We put the piston plate on the piston and attached the outside sliders to the piston plate. We also cut a top plate. We disassembled one grabber towards the end of the meeting...explanation below. We also cut three 3" C channels but one of them is the incorrect length.
SOOOO... The piston plate on the top extended too far for the clamp plate to come into contact with the piston shaft. We can't move the 8020 down because of the pneumatic fittings. So we will need to figure out how to solve the problem tomorrow.
Kinda =/