Shooter 2016
Attendance
Note Info
Students
Mentors
Date & Time
Location & Author
2/6/2016
6 hours
Shapland Shop
Neil T.
Notes
DONT OVER-TIGHTEN THE COUPLER, YOU WILL STRIP EVERYTHING
Work Completed
put together the two shooter modules (off the robot)
this involved making the flywheels and putting in cims and such
we had to cut the shafts down a bit
Challenges
WE PUT THE OUSIDE PLATES ON BACKWARDS.
cim holes were too small so we debured for a very long time
shafts were too long so the wheel was crooked
Work for Next Meeting
redo the outside plates
tighten the couplers
get things mounted on the bot
test
On Schedule?
yarp