Edit
Note Viewer
Mechanical - General 2018
Attendance
Note Info
Students
Mentors
Date & Time
Location & Author
Adam P.
2/12/2018
3 hours
Aquiferland
Ha T.
Work Completed
deburred the heck out of the clearance hole for the middle bearing blocks on dt side channels & got the bearing blocks to fit flush with the frame
assembled another gearbox (partially)
didn't put locktite on the 4-40 screw just in case we need to disassemble
electrical is experimenting w/ limit switch at the back wall of feeder to detect when cube is all the way in the feeder
Challenges
the router surface was slanted so the belly pan is now scrapped --> the
Mr. Goetting will machine the belly pans instead
shaft of feeder prototype wheel dislodged from bearing & fell off of nonadrive --> fixed
the tips of all the snap ring openers are broken off --> used dremel to sharpen --> kinda worked but not really...
really hard to take off the ring so make sure the correct DOG gear is on the shaft before putting it on!
Work for Next Meeting
attach wheel hubs onto wheels
start assembling the wheels (put on 18T sprockets (NOT 22T), measure out the chains, etc.)
mount bumper pieces
On Schedule?
uhhh...
7 days til bag day and counting