Note Viewer

• deburred the heck out of the clearance hole for the middle bearing blocks on dt side channels & got the bearing blocks to fit flush with the frame
• assembled another gearbox (partially)
  • didn't put locktite on the 4-40 screw just in case we need to disassemble
• electrical is experimenting w/ limit switch at the back wall of feeder to detect when cube is all the way in the feeder

• the router surface was slanted so the belly pan is now scrapped --> the 
  • Mr. Goetting will machine the belly pans instead
• shaft of feeder prototype wheel dislodged from bearing & fell off of nonadrive --> fixed
• the tips of all the snap ring openers are broken off --> used dremel to sharpen --> kinda worked but not really...
  • really hard to take off the ring so make sure the correct DOG gear is on the shaft before putting it on!

• attach wheel hubs onto wheels
• start assembling the wheels (put on 18T sprockets (NOT 22T), measure out the chains, etc.)
• mount bumper pieces

uhhh...

7 days til bag day and counting