Mechanical - General 2018
Attendance
Note Info
Students
Mentors
Date & Time
Location & Author
Anna O.
Ethan C.
Mayank H.
Shashank H.
Adam P.
Bob S.
2/14/2018
3 hours
Aquiferland
Ha T.
Work Completed
- put wheel hubs on wheels
- wheels on practice drivetrain
- measured and cut chains
- measured and marked lexan to be cut for ramp
- cut shafts for feeder
- all the ramp extrusions are cut and filed, need to be labeled
Challenges
- not enough master links --> need to order more (only have 3 in shop)
- didn't have screws in shop for wheel hubs, Adam bought some 8-32 from Home Depot
Work for Next Meeting
- tap feeder shafts for 1/4-20 bolt
- construct comp dt when back channel is done machining
- when Chris gets 3D printed 3/8" hex spacers for gearboxes assemble those, put locktite on the 4-40 screws and run them then mount onto dt
- assemble belly pan when it arrives
- assemble elevator sliding blocks when the machined plates arrive
- mark & drill holes in ramp extrusions when conecting pieces are done machining
- cut lexan for ramp & feeder
On Schedule?
the schedule isn't real
time isn't real. nothing is real. we're all a simulation.
- elon musk