Edit

Note Viewer

Electrical & Code 2019

Attendance

Note Info

Students
Mentors
Date & Time
Location & Author

  • David S.

  • 2/14/2019

  • 3 hours

  • Aquiferland

  • David S.

Work Completed

Fixed errors identified by VSCode in subsystems/cargo.py

Added subsystems to robot.py

Challenges

Simulator quits due to error in code (had to leave before could fix it)

Running simulator on VS Code does not give the actual error in the code...

Work for Next Meeting

  1. Wire DT1 & DT2 as the rest of the robot gets assembled

    • We still need to add the radio, ethernet switch, solenoid block, arduino, limelight, ultrasonic sensors, talon SRXs, victor SPXs, encoders, potentiometers, light sensors, and some more that I'm probably forgetting

  2. ROBOT CODE!!!!!
    • Get drive correction working
    • Line followers integrated with Hatch PID
    • 1 step process for climber
    • Add code for ultrasonic sensors
    • Cargo set points
    • Vision
    • etc. etc.
  3. Line Followers & Arduino -> someone (who is not Bryn and is going to both competitions) needs to understand this and know how to debug it...
  4. Install More Boards on comp & practice bot RoboRIOs. Manual for More Board:
    http://www.revrobotics.com/content/docs/REV-11-1100-UM.pdf
  5. Make list of all the general & subteam specific electrical components on the robot (FRC4096 --> 2018 - 2019 --> Build Season --> Electrical folder --> Electrical components)
  6. Continue the schematic for the electrical system using the schematic software stuff --> talk to Malia & Caden about this if you are interested (or maybe eddy)
  7. Vision
    • Now that the gyro is working again, this should be worked on some more...
    • Drive robot towards vision target so the target is in view of limelight; then have robot drive to a specified distance and turn to a specified angle from the vision target (using a calibrated position and the tx & ty from the limelight)
    • Get Rotate_To_Angle_Limelight command working on Poly again.  PID will need tuning.
    • Continue learning how to use limelight
      • Specifically learn what all of the different values on the network table are and how they can be used
      • Continue to look into the Limelight documentations
    • Go to specified range from target (check case studies on limelight website & documentation)
    • Go to specified range and aim at target (again check case studies)

On Schedule?

Yes